Bubble Mat PTAM0000 (MC-1-PA)

The Bubble Mat overlay consists of 130 bubble cells which alternate to give many differing touch points. This is an effective base level solution to prevent and treat mild pressure sore conditions.

Bubble Mat
  • Dimensions: 238x103x5cm suitable for patients up to 100kgs
  • Light weight portable system folds under either end of mattress and comes with a 1 year warranty.
  • Control Unit features low pressure warning light, hang hooks, adjustable pressure and 1 year manufacturer's warranty.
Click here for the User Guide pdf

email Click here to enquire about the Bubble Mat MC-1-PA.


Slimline 3 Alternating Overlay - PTAM0010 (MC-3-PA)


Slimline 3 Alternating Overlay

The slimline3 pressure relieving alternating support system is designed to balance cost effectiveness, comfort and pressure injury prevention. Light weight and manoeuvrable, this dynamic system offers a quiet, therapeutic solution for users at risk of developing pressure ulcers.

Pressure Mapping

Slimline 3 Alternating Overlay Pressure Map

Figure 1.

Slimline 3 Alternating Overlay Pressure Map

Figure 2.

Pressure Map Scale

Pressure Scale in mmHg

For those with limited mobility, the slimline3’s reduced cell depth assists easy movement in and out of bed, promoting independence.

The slimline3 is easy to assemble and operate for users and carers, while its pressure control dial enables comfort adjustments to meet individual needs. As the system can be rotated 180°, the control unit can be placed at either end of the bed.

Pressure Mapping

Subject: Female, weight 46.2kg, BMI 19. Figure 1. Pressure mapping illustration of the 3 inch APM demonstrates A cells in the deflated position. Figure 2. Demonstrates B cells in deflated posistion. Note that a complete change in contact area under pressure has occurred upon second cycle and almost all localised regions of increased pressure have dissipated.


Features:
  • Suitable for patients up to 120kgs
  • Can be secured over any existing standard single mattress
  • Easy to remove, clean and transport
  • Gentle and dynamic support while maintaining and stimulating the flow of blood and lymphatic fluids
  • Higher number of smaller contact points for a greater degree of comfort.
  • Small cell sizes prevents smaller limbs from sliding between inflated cells
  • Visible alarm warns of system inconsistencies such as power failure and pressure drops to ensure patient or carer notification
  • Tape sealed sewn seams helps prevent entry of pathogens and secretions/excretions into the mattress and facilitates easy cleaning

Technical Information

Control Unit
Control Interface Dimensions
(WxHxDmm)
Unit Weight Air Output (Litres per Minute) Hose Connection Type Low Pressure Alarm Power Down Alarm Mode of Operation
Analogue 135x270x115mm 2.1kg 6.5 lpm Quick release Visual only Optional Continuous
Support Surface
Configuration Dimensions
(WxHxDmm)
Alternation Type Alternation Time Side Bolsters Number of Cells CPR Function Anti Kink Hosing Positioning Handles
Overlay 2000x880x90mm 1 cell in 2 12 minutes Optional 21 Tag Tick Tick

More Features:
  • Polyurethane top cover is vapour permeable, water resistant and multi-stretch
  • Top Cover prevents moisture transfer and accumulation while minimising friction, shear and fabric ‘hammocking’
  • Top cover attached by 360° quick release zip
  • Offers carers and low risk users an effective alternative to static pressure care
Click here for brochure pdf

email Click here to enquire about the Slimline 3 Alternating Overlay - PTAM0010 (MC-3-PA).


Premium5Digital Alternating Overlay PTAM0030 (MC-5D-NH)


Premium 5 Alternating Overlay

An excellent value for money solution combining some of the best of the premiumdigital9 features in an overlay system. Prevention is the core strategy of this product, designed and developed to ensure the debilitating effects of Decubitus Ulcers are avoided.

Pressure Mapping

Premium 5 Alternating Overlay Pressure Map

Figure 1.

Premium 5 Alternating Overlay Pressure Map

Figure 2.

Pressure Map Scale

Pressure Scale in mmHg

Used in conjunction with an effective pressure injury preventative strategy including diet, exercise and care management, the premiumdigital5 is a highly effective pressure care overlay solution. Easy to place over any existing mattress this lightweight, manoeuvrable and versatile overlay system is especially appropriate for home care and nursing home settings.

Pressure Mapping

Subject: Female, weight 72kg. BMI 22. Figure 1. Pressure mapping illustration of the 5 inch APM demonstrates A cells in the deflated position. Figure 2. Demonstrates B cells in deflated posistion. Note that a complete change in contact area under pressure has occurred upon second cycle and almost all localised regions of increased pressure have dissipated.


Features:
  • Can support patients of 150kgs
  • Can be secured over any existing standard single mattress
  • Easy to remove, clean and transport
  • 18 individual alternating transverse cells
  • Gentle and dynamic support while maintaining and stimulating the flow of blood and lymphatic fluids
  • Non-alternating head cells for added stability of the head as well reducing sleep disturbances
  • Rapid release CPR tag – Highly visible and accessible tag in the event of CPR being required

Technical Information

Control Unit
Control Interface Dimensions
(WxHxDmm)
Unit Weight Air Output (Litres per Minute) Hose Connection Type Static Transfer Function Auto Disengage Static Function Static Flotation Function Low Pressure Alarm Power Down Alarm Mode of Operation
Digital 315x270x120mm 3.5kg 6.5 lpm Quick release Tick 20 mins 21mmHg Audible and visual Tick Noncontinuous
Support Surface
Configuration Dimensions
(WxHxDmm)
Alternation Type Alternation Time Side Bolsters Number of Cells CPR Function Anti Kink Hosing Positioning Handles
Overlay 2000x880x135mm 1 cell in 2 12 minutes Optional 18 Pull Tag Tick Tick

More Features:
  • Eight digital pressure comfort settings
  • Polyurethane top cover is vapour permeable, water resistant and multi-stretch
  • Top Cover prevents moisture transfer and accumulation while minimising friction, shear and fabric ‘hammocking’
  • Top cover attached by 360° quick release zip
  • Heat sealed seams and full length waterfall flap – Helps prevent entry of pathogens and secretions/excretions into the mattress and facilitates easy cleaning
  • Control unit emits warning sound and flashes lights. Warns of system inconsistencies such as power failure and pressure drops to ensure patient or carer notification.
Click here for Brochure pdf

Click here for User Manual pdf

email Click here to enquire about the Premium5Digital Alternating Overlay PTAM0030 (MC-5D-NH).


Premium8Digital Alternating Mattress PTAM0050 (MC-8D-NH)


Premium 8 Alternating Overlay

The premiumdigital8 is the economical full mattress replacement system for the high risk user. Ideal for the heavier patient, the system provides an increased cell depth to prevent bottoming out and enhance therapeutic benefits and comfort.

Pressure Mapping

Premium 8 Alternating Mattress Pressure Map

Figure 1.

Premium 8 Alternating Mattress Pressure Map

Figure 2.

Pressure Map Scale

Pressure Scale in mmHg

Used in conjunction with an effective pressure injury preventative strategy including diet, exercise and care management, the premiumdigital8 is a highly effective pressure care mattress solution. Infection control and prevention is the key focus of the premiumdigital8, complete with heat sealed seams, antibacterial taping and waterfall skirts.

Pressure Mapping

Subject: Male, weight 90kg, BMI 28. Figure 1. Pressure mapping illustration of the 8 inch APM demonstrates A cells in the deflated position. Figure 2. Demonstrates B cells in deflated posistion. Note that a complete change in contact area under pressure has occurred upon second cycle and almost all localised regions of increased pressure have dissipated.


Features:
  • Can support patients of 180kgs
  • Deep 200mm cells give greater cell depth that enhances the therapeutic benefits and comfort, especially for the heavier user
  • 21 individual alternating transverse cells give gentle and dynamic support while maintaining and stimulating the flow of blood and lymphatic fluids
  • Eight digital pressure comfort settings to adjust comfort requirements
  • Rapid release CPR tag – Highly visible and accessible tag in the event of CPR being required
  • Heat sealed seams and full length waterfall flap helps prevent entry of pathogens and secretions/excretions into the mattress, facilitates easy cleaning

Technical Information

Control Unit
Control Interface Dimensions
(WxHxDmm)
Unit Weight Air Output (Litres per Minute) Hose Connection Type Static Transfer Function Auto Disengage Static Function Static Flotation Function Low Pressure Alarm Power Down Alarm Mode of Operation
Digital 315x270x120mm 3.5kg 6.5 lpm Quick release Tick 20 mins 21mmHg Audible and visual Tick Noncontinuous
Support Surface
Configuration Dimensions
(WxHxDmm)
Alternation Type Alternation Time Side Bolsters Number of Cells Static Head Cells CPR Function Anti Kink Hosing Positioning Handles
Mattress 2000x880x230mm 1 cell in 2 12 minutes Optional 21 Tick Pull Handle Tick Tick

More Features:
  • Polyurethane top cover is vapour permeable, water resistant and multi-stretch
  • Top Cover prevents moisture transfer and accumulation while minimising friction, shear and fabric ‘hammocking’
  • Top cover attached by 360° quick release zip
  • Static and Max Inflate functions stabilises the patient for treatment, transport and hygiene purposes. Automatically switches to alternating mode after 30 minutes
  • Control unit emits warning sound and flashes lights. Warns of system inconsistencies such as power failure and pressure drops to ensure patient or carer notification.
Click here for Brochure pdf

Click here for User Manual pdf

email Click here to enquire about the Premium8Digital Alternating Mattress PTAM0050 (MC-8D-NH).


Premium9Digital Alternating Mattress - PTAM0070 (MC-9D-NH)


Premium 9 Alternating Overlay

The premiumdigital9 is a cost effective, professional solution for high to very high risk patients. It facilitates greatly increased comfort while maximising therapeutic benefits.

The unique heel zone ensures effective alternation of the high risk calcaneus and malleolus areas of the lower leg. Combined with lateral side bolsters for additional patient stability, it is ideal for patients at risk of developing pressure related ulceration. The system also offers an excellent healing surface for patients receiving treatment for existing wounds.

Pressure Mapping

Premium 9 Alternating Mattress Pressure Map

Figure 1.

Premium 9 Alternating Mattress Pressure Map

Figure 2.

Pressure Map Scale

Pressure Scale in mmHg

Premium 9 Alternating Mattress Pressure Map

Figure 3.

Pressure Mapping

Subject: Female, weight 86kg, BMI 31.2. Figure 1. Pressure mapping diagram of the 9 inch APM demonstrates A cells in the deflated position. Figure 2. demonstrate B cells in the deflated position. Figure 3. Demonstrates C cells in deflated position. Note that a complete change in contact area under pressure has occurred upon third cycle.


Features:
  • Can support patients of 180kgs
  • Cyclic alternation ratio of two cells fully inflated to one cell deflated for more patient comfort and stability as well as increased ‘zero pressure’ times
  • Internal static cell remains fully inflated at all times. Built in safety mattress. Reduces the risk of bottoming out in the event of a power interruption
  • Non-continuous operation with digital touch panel and bright LED interface which is easy to operate, has less moving parts to reduce wear and tear on the control unit and a sealed system ensures easy cleaning and better infection control
  • 19 individual alternating transverse cells for gentle and dynamic support while maintaining and stimulating the flow of blood and lymphatic fluids
  • Eight digital pressure comfort settings give calibrated pressure levels to better suit individual comfort needs
  • Highly visible and accessible emergency release CPR handle has rapid deflation capability in the event of CPR being required
  • Air filled mattress replacement support surface for lower anatomy (heel zone) offers optimum alternation and support of heels and lower legs, especially for patients at complete bed rest or nursed in upright position
  • Heat sealed seams and full length waterfall flap helps prevent entry of pathogens and secretions/excretions into the mattress, facilitates easy cleaning

Technical Information

Control Unit
Control Interface Dimensions
(WxHxDmm)
Unit Weight Air Output (Litres per Minute) Hose Connection Type Static Transfer Function Auto Disengage Static Function Static Flotation Function Low Pressure Alarm Power Down Alarm Mode of Operation
Digital 315x270x120mm 3.5kg 6.5 lpm Rapid release handle Tick 20 mins 21mmHg Audible and visual Tick Noncontinuous
Support Surface
Configuration Dimensions
(WxHxDmm)
Alternation Type Alternation Time Side Bolsters Cell in Cell Technology Treatment Zones Number of Cells Static Head Cells CPR Function Anti Kink Hosing Positioning Handles
Mattress 2000x880x280mm 1 cell in 3 12 minutes Integrated Tick Heel Zone 19 Tick Rapid Release Handle Tick Tick

More Features:
  • Polyurethane top cover is vapour permeable, water resistant and multi-stretch
  • Top Cover prevents moisture transfer and accumulation while minimising friction, shear and fabric ‘hammocking’
  • Top Cover has heat welded seams
  • Top cover attached by 360° quick release zip
  • Static and Max Inflate functions, all cells become rapidly and consistently inflated to stabilises the patient for treatment, transport and hygiene purposes, amongst numerous others; automatically switches to alternating mode after 30 minutes
  • Control unit emits warning sound and flashes lights. Warns of system inconsistencies such as power failure and pressure drops to ensure patient or carer notification.
  • Hinged profile base for mattress inclination for continuous alternation in an inclined position. For patients upright in bed for extended periods
  • Air filled supporting side structures give increased lateral stability and reduced risk of falling/slipping out of bed. Quickly equalises mattress pressure, adapting to any changes in body movement
Click here for Brochure pdf

Click here for User Manual pdf

email Click here to enquire about the Premium9Digital Alternating Mattress - PTAM0070 (MC-9D-NH).


Alternating Seat Overlay Cushion - PTAM0250 (SC-01-NH)


SC-01-NH Alternating Seat Overlay Cushion

The PTAM0250 Alternating Seat Overlay Cushion offers a combination of care for patients capable of spending time out of bed. Its integrated foam layer does away with the need for an underlying cushion, while its six cells alternate 1 in 2 every 12 minutes.

This system shares many of the features of its mattress cousins including a heavy duty 360° zipper, as well as a fully sealed top cover with an infection control zip flap.

The analogue control unit allows for mounting on either the chair back or under the chair.

Quick release connectors join together to retain pressure in the cushion. This allows a transport mode with pressure relief.

Quick Facts

  • Seat cushion replacement or overlay
  • Care level: Low to High Risk
  • Integrated foam base for added support
  • Analogue control unit
  • Non slip pads on base
  • PU coated 2 way stretch top cover with side pleats
  • Flaps and heavy duty zipper connection
  • Weight limit 100kg
Click here for Brochure pdf

email Click here to enquire about the Alternating Seat Overlay Cushion - PTAM0250.