Return to front page
|
Return to front page |
Anaesthetic Drying Cabinet |
|
APPLICATION
The Malmet DC series of Drying Cabinets are designed to dry respiratory tubing, face masks, surgical instruments
SAFETY Dual over temperature cut-out. Set point temperatures are locked to prevent unauthorised change. Cabinet temperature is pre-set at 70°C and governed not to exceed this temperature. VERSATILITY A modular hanging system with shelving and trays to suit any requirement. EFFICIENCY A centrifugal fan drives heated air downwards to provide rapid internal drying of suspended corrugated tubing and circulate warmth throughout the chamber. RELIABILITY A quality cabinet built for years of continuous use. The Malmet factory is ISO9002 certified and all Malmet products are backed by a one year warranty |
|
FLEXIBILITY
A cabinet which can handle large loads with any combination of tubes and parts.
EASY INSTALLATION Connects to standard hospital power outlets; a vent connection removes heated air. COMPACT Centre opening doors protrude only 330mm when fully open. Pass through wall units are available. ECONOMY Double wall stainless steel construction with an insulated cavity, combined with double glazed doors. Heating is discontinued when doors are open. HYGIENE A washable filter removes fluff, lint, dust etc. COMPLIANCE Meets both AS2514 (Drying Cabinets for Medical Equipment) and As2774 (Drying Cabinets for Respiratory Equipment) |
| PRODUCT SPECIFICATIONS | |
| Outside Dimensions (mm) | 1750h x 750w x 640d |
| Chamber Dimensions (mm) | 1152h x 600w x 560d |
| Outside Dimensions Pass Through | 1750h x 600w x 690d |
| Door Gasket | Silicon Rubber |
| Doors | Double Glazed Tempered, Centre Opening with Magnetic Door Closure |
| Air Vent | Damper controlled to air-conditioner return duct or direct to atmosphere |
| Air Filter (mm) | 150 x 150 15 washable polyurethane |
| Air Bleed Off | Automatic Damper Control |
| Electrical (Australia Only) | Plug into 15amp GPO |
| Shelves | Electro polished stainless steel wire |
| Product Code | Model | Description |
| 8-A00-87-030 | DC11 | FRONT LOAD MIXED 6 shelves, 2 instrument trays, 2 x 18 hole tube holders, 3 air diffusers, 3 air diffuser blanks. |
| 8-A00-87-040 | DC12 | FRONT LOAD SHELVES 6 shelves, 2 instrument trays |
| 8-A00-87-051 | DC13 | FRONT LOAD HANGING 5 x 18 hole tube holders, 3 air diffuser blanks |
| 8-A00-87-060 | DC21 | PASS THROUGH MIXED 6 shelves, 2 instrument trays, 2 x 18 hole tube holders, 3 air diffusers, 3 air diffuser blanks |
| 8-A00-87-070 | DC22 | PASS THROUGH SHELVES 6 shelves, 2 instrument trays |
| 8-A00-87-081 | DC23 | PASS THROUGH HANGING 5 x 18 hole tube holders, 3 air diffusers blanks |
| Spare Parts | |
| MODEL | DESCRIPTION |
| 8-M00-87-033 | Instrument Tray |
| 8-M00-87-034 | Air Diffuser Blank |
| 8-M00-87-035 | Air Diffuser (with holes) |
| 8-M00-87-038 | Anaesthetic Bag Holder |
| 8-M00-87-093 | Part width shelf DC11/DC21 models. Size 520d x 340w |
| 8-M00-87-094 | Part width shelf DC12/DC22 models. Size 520d x 600w |
| 8-M00-87-095 | 10 x 50mm Diameter tube holder |
| 8-M00-87-100 | 16 x 37mm Diameter tube holder (models prior to Feb 2002) |
| 8-M00-87-104 | 18 x 37mm Diameter tube holder |