Malmet Energy Saver Bedpan Sanitizer

The Malmet Energy Saver Bedpan Sanitizer, designed in Australia with patented innovations, is the most efficient bedpan sanitizer on the market.

Features of the ES Sanitizer:

Specifically manufactured for the healthcare industry
Stainless Steel construction
Low watt single phase element
High Pressure rotating cleaning nozzles
Only 22 litres of water per cycle
Hands Free Operation
Zero Contamination
Chamber capacity: 2 Urinal and 1 bedpan
No steam or extra heat
No hot water required
Cool down rinse - no hot pans/bottles
Whisper quiet operation
No external water tank overflow connections
No steam vent pipe required

Models

ES91-1000 - Energy Saver Sanitizer with "S" Trap
ES91-1005 - Energy Saver Sanitizer with "P" Trap

Click here to download the Product Manual

Click here to download the Spare Parts Catalogue

Specifications

CYCLE	INITIAL WASH HEAT UP SANITIZATION COOL DOWN RINSE CYCLE COMPLETE	17 seconds 2 minutes 20 seconds 1 minute 5 seconds 15 seconds 4 minutes (approx)
ELECTRICAL RATING	VOLTAGE PHASE HERTZ AMPS CIRCUIT BREAKER (recommended)	240 Single 50 21 25 amp
HOT WATER TANK	CAPACITY MATERIAL TEMPERATURE CONTROL INLET CONTROL OVERFLOW PROTECTION	2.3 litres Copper Sealed Stainless Steel temperature probe 240 volt solenoid (hot water) 20mm outlet to trap
COLD WATER TANK (BACKFLOW AIRBREAK) AS3500	CAPACITY MATERIAL INLET CONTROL OVERFLOW PROTECTION	19.5 litres 6mm ABS 240 volt solenoid 40mm outlet to trap
WATER CONSUMPTION	INITIAL WASH SANITIZATION COOL DOWN RINSE TOTAL CONSUMPTION	20 litres 200ml 1.8 litres 22 litres
SPRAY SYSTEM	MAIN WASH COOL DOWN	1 x rotating 360° nozzle 2 x fixed 60° nozzles 2 x fixed 0° uninary nozzles 1 x fixed 60° nozzle
WASH CHAMBER	MATERIAL SEAL CAPACITY	1.2mm Stainless Steel Silicone gasket 2 x urinal bottles + bed pan + lid OR 2 x urinal bottles + commode bowl + lid OR 2 x urinal bottles + standard slipper pan + lid (With slipper pan rack)
SOIL LINE CONNECTION	TYPE MATERIAL SIZE FITTING	S or P trap 6mm ABS 100mm ID Flange & gaskets with Stainless Steel bolts
FRAME	MATERIAL FASTENERS - FRAME/BODY FEET	1.2mm Stainless steel 3/16" Stainless Steel rivets 100mm adjustable with screw down holes
VENT	NO VENT REQUIRED	N/A
NOISE LEVEL	DOOR OPEN/CLOSE COLD WATER FLUSH COLD WATER FILL SANITIZATION FINAL RINSE	57 dBA average at 1 M 75 dBA average at 1 M 58 dBA average at 1 M 40 dBA average at 1 M 56 dBA average at 1 M
UNIT WEIGHT	SHIPPING	110kg
POWER CONSUMPTION	SINGLE PHASE	0.278 KWH per cycle