Mobile Shower Commode - Options

PRESSURE CARE SHOWER COMMODE SEATS
Open Front - KA11PHOP
Closed Front - KA11PHCP

This innovative new product has been designed to complement the user's pressure management routine. Incorporating a special foam design, engineered to improve the spread of pressure across the seat.

The seat is upholstered in an antimicrobial four-way stretch Dartex material, which is waterproof but breathable to optimise user comfort.

Featuring a pan runner design allowing the seat to quickly clip in and out of the commode frame for ease of service and cleaning. No messy fasteners!

This seat has been independently tested and proven to be effective in reducing pressure levels experienced by the user.

HANDMADE PADDED SEATS
Open Front - LM11HO & KA11HOP
Closed Front LM11HC & KA11PHCP
(Junior size LM11HJO & KA11HJOP, Child size KA11HCOP)

HAND MADE PADDED SEATS
Right Hand Opening - KA11HRP
Left Hand Opening - KA11HLP

Side opening frame recommended to gain full use of this seat.

MACHINE MADE PADDED SEATS
Closed Front - KA11PCPB

HANDMADE PADDED SEATS
Closed Front - LM11HC & KA11HCP
(Junior size LM11HJC & KA11HJCP, Child size KA11HCCP)

MACHINE MADE PADDED SEATS
Open Front - KA11POPB

All seats can be supplied with the unique patented removable seat feature*.
The seats easily clip onto the shower commode* and are just as easily removed.
This feature assists easy cleaning of the seat and shower commode. It also allows easy seat interchange to suit the individual user.
* Certain shower commodes (e.g. folding commodes) do not use this feature.

STUMP SUPPORT
KA12LP (Left)
KA12RP (Right)

Swing away, padded vinyl, adjustable 50mm from below seat to above seat.

BRAKE EXTENSION LEVER
KA12BE

Fits over standard brake lever to extend lever 150mm above seat for self-propelling models.

FRONT CASTOR EXTENSION
KA11EF

200mm extension for extra forward stability on model KA112S.
Normally used with KA12L leg extension.
Must be fitted at time of manufacture.

REAR CASTOR EXTENSION
KA11ER

120mm extension for extra rear stability on models KA112S, KA114S & KA116S.
Must be fitted at time of manufacture.

ANTI-TILT WHEELS
KA12B

Will fit models KA120S & KA130S

OXYGEN BOTTLE CARRIER
KA11OX

Stainless steel oxygen bottle carrier bolts on to rear leg upright (left or right).

POMMEL
KA11P

Padded vinyl - suitable for all models. Must be fitted at time of manufacture.
Note: Can only be used with open-front seats.

RIGHT (or LEFT) SIDE OPENING SEAT
KA11HR (L)

Handmade padded vinyl seat fits all modified commodes; eg. As shown on KA130SOR.
Must be fitted at time of manufacture.

TIE ON SEAT - KA11PS
TIE ON BACK - KA11PB (200mm high)

Padded seat and back made from waterproof vinyl covering

FIXED, CURVED, PADDED BACK
KA11PBF

This fixed curved padded back is 260mm high. Must be fitted at time of manufacture.

BOLT-ON HEAD REST
KA12HR

This newly-designed bolt-on head rest is adjustable in height, angle and depth.

It has a modern, attractive appearance when compared to the old model. Several design changes have been made to enhance the function and performance of the new headrest.

1. Solid Polyurethane construction: The headrest is manufactured from Polyurethane, a more durable material than that used on the superseded model. It offers the user more support and comfort than previous models.
2. No stitching seams: The seamless unit not has an improved appearance; water ingress will no longer be an issue due to the moulded single piece design.
3. Improved contour: A redesigned contour contributes to the improved appearance and enhanced support and comfort for the user.

PELVIC/CHEST STRAP - KA11STF
May be attached to any frame at time of manufacture.

COMMODE BOWLCARRIER - KA11SBP
COMMODE BOWL& LID - KA50B
BEDPAN CARRIER - KA11SPP
BEDPAN - KO90001

IV POLE - KA11IV

IV pole clamps on with adjustment from the floor 1200mm to 1700mm.

FOLDING SAFETYARMS - KA11AFS

Folding safety arms give the user extra security. They fold away, free from obstruction.

LOCK DOWNARMS - KA11LX

A locking mechanism is used to lock down the swing up arms.

LOWERED SWING UPARMS - KA11ASSX

Lowered swing up arms are 190mm from the top of the seat to the top of the arm.

REMOVABLE ARMS - KA11RAX

Removable arms (exchange option) - must be fitted at time of manufacture. These removable arms have a push button lock.

DROPSIDE ARMS - KA11DA

Additional side support, but still ideal for obstruction free side transfers. Must be fitted at time of manufacture.

PADDED VINYLARM REST - KA11AWF

Will fit all model arms. Must be fitted at time of manufacture.

GUTTER SUPPORT - KA11G

A padded gutter support to fit all model arms. Must be fitted at time of manufacture.

FOOT PLATE EXTENSION - KA12F

This aluminium foot plate extension is 250mm x 180mm. Must be fitted at time of manufacture.

SINGLE LEG EXTENSION - KA12L

This stainless steel leg extension clips on to the frame and can be used on the left or right. Double leg extension available KA12LD.

ELEVATING LEG RESTS - KA12EL

These elevating leg rests are swing-away and adjustable from 0° to 85° off vertical.