Simply L & M
Return to front page

Transcutaneous Electrical Nerve Stimulator (T.E.N.S.)


   Click here for a brochure pdf
   Single Channel Dual Channel
Transcutaneous electrical nerve stimulation (TENS) currently is one of the most commonly used forms of electroanalgesia. A gentle electrical current is passed through electrodes which are taped to the skin near the site of the pain. Because the machines are quite portable and easy to use, people can use them at home.

TENS LMT1

TGA Approval Number: 140050



Return to top of page

LMT1 - Single Channel Transcutaneous Electrical Nerve Stimulator (TENS)

Package contains:
  • LMT1 TENS unit
  • Belt Clip
  • Set of Leads
  • 4 Self-adhering Electrodes
  • 9 volt Battery
  • Instruction Leaflet
Technical Specifications:
Channel Single
Pulse Amplitude Adjustable. 40mA peak maximum for positive pulse, or 8mA peak maximum or negative pulse into 500ohm load.
Pulse Rate 60Hz fixed
Pulse Width 120 microseconds fixed
Wave Form Asymetrical Bi-phasic square pulse
Voltage 0-110 Volts (open circuit)
Charge per Pulse 5 micro coulombs max.
Dimensions 25mm x 64mm x 93mm
Weight 120 grams (including battery)
Tolerance +/- 20%


Click here to enquire about the LMT1 - Single Channel TENS.

TENS LMT2

TGA Approval Number: 140050
TENS LMT2

LMT2 - Dual Channel Transcutaneous Electrical Nerve Stimulator (TENS)

Package contains:
  • LMT2 TENS unit with Belt Clip
  • Set of Leads
  • 4 Self-adhering Electrodes
  • 9 volt Battery
  • Instruction Booklet
Technical Specifications:
Channel Dual
Pulse Amplitude Adjustable. 0-80mA peak maximum for positive pulse, or -20mA peak maximum or negative pulse into 500ohm load each channel.
Pulse Rate Adjustable. 2Hz - 120Hz
Pulse Width Adjustable. 40 -260 microseconds
Timer 3 operation modes - 30 mins., 60 mins. and continuous
Modulation Mode Pulse width is automatically varied in a cyclic pattern over an interval of nominally 5 seconds maximum.

Pulse width decreases linearly over a period of 1.5 seconds from the control setting value to a value which is decreased 45% maximum.

The narrower pulse width will continue for 2 seconds maximum, then increase linearly over a 1.5 second period to its original value. The cycle is then repeated.
Burst Mode Bursts consist of 9 +/- 2 pulses at maximum pulse rate. Bursts occur twice every second.
Wave Form Asymetrical Bi-phasic square pulse
Voltage 0-110 Volts (open circuit)
Charge per Pulse 21 micro coulombs max. Positive pulse and negative pulse separate.
Battery 9V - alkaline, or nickel-cadmium rechargeable
Dimensions 23mm x 64mm x 91mm
Weight 120 grams (including battery)


Click here for guide for placing the electrodes pdf

Click here for guide for a user manual pdf

Click here to enquire about the LMT2 - Dual Channel TENS.

Return to top of page

TENS LMT2