Utensil Washer Disinfector

Designed to hold 6 large wash basins or a varied load.

All Malmet products are manufactured in the facility at Leeton NSW, which is ISO 9001:2015 and ISO 13485:2016 Certified.

Malmet Top Loading Utensil ⁄ Bowl Washer Disinfector

Malmet Utensil ⁄ Bowl Washer Disinfector

Malmet’s Washer Disinfectors are purpose-built washer disinfectors, and are indeed engineered to last a lifetime. The machines are user-friendly and simple to operate.

This Malmet Top Loading Washer Disinfector is designed to hold 6 large wash basins or a varied load of smaller items such as kidney dishes, sputum bowls, tooth mugs etc.

Key Points of Interest

Top loading heavy duty, purpose built utensil washer
User friendly single button start
Computer monitored door lock safety mechanism
Large capacity
Used for kidney dishes, sputum bowls, tooth mugs, etc
Temperature display
Visual detergent refill indicator
Disinfection to higher Ao600 level, as recommended by AS ⁄ NZS 4187
Compliance: ISO 13485 & ISO 9001

Inside Utensil Washer Disinfector


Inside Malmet Utensil Washer Disinfector
Kidney dish rack 81-5240	Instrument Basket assembly 81-5116
Optional rack assemblies

Secure and safe disinfection

A computer monitored door lock mechanism – it cannot be opened until the cycle is complete.
It is equipped with an "intelligent" microprocessor developed for Malmet which incorporates the fine–tuning of experience with the best features of heavy–duty industrial electronics.
Over Temperature Protection – An element over temperature thermal switch with a manual reset.
ARTG Certificate

A detergent system delivers 30ml of concentrated detergent in the initial wash.

Detergent Datasheet pdf

Important internal components

WDT2.1 Utensil Washer Disinfector specifications

Model		WDT2.1 - Top Loading
Electricity Supply - (Australia Only)		240V 18Amp 50Hz
Water Supply		Cold and Hot (min 43ºC)
Dimensions (mm)		655W x 840D x 1030H
Internal Dimensions		595W x 480D x 595H
Water Capacity		18.5 litres
Pump Circulation	Electrical rating	0.55 kW
	Capacity at head	2.25m³/hr at 31m head
Pump drain	Electrical rating	0.16 kW
	Capacity at head	45 litres/min @ 1.25m head
Pump detergent	Type and make	Ub 260 C
Detergent usage		Approx. 65ml per cycle
Detergent type		Malmet or equivalent
Temp display		0 - 100ºC coil meter
Thermistor probe		Resistance 22k ohms at 25ºC
Electric element rating		3.6kW 240V
Cold water	Consumption /cycle	32 litres
Hot water	Consumption /cycle	48 litres
PCB		Yes
Electrical rating of unit		240 V 18A full load
Cycle times		Approx. 28 minutes with 60ºC incoming hot water at 350 kPa
Disinfecting times		70ºC - 15 minutes
		75ºC - 10 minutes
		80ºC - 5 minutes
		85ºC - 2 minutes
Materials	Wash chamber & external panels	304 stainless steel
Materials	Base tray & frame	304 stainless steel